Pressure Gages wholesaler & Wholesale Dealers in -

Product Details:

Product Details:
BrandDwyerEnclosure RatingNEMA 4/4X (IP66).Process Connection1/4" male NPT.Display4 digit (.425" H x .234" W digits)Size3.00" OD x 1.90" deep (max).Weight8.84 oz (275 g).Temperature (Deg. Celsius)0 to 130 Degree F (-18 to 55 Degree C).
Replace your outdated analog gages with the new SERIES DPG Digital Pressure Gage. The Series DPG has a high ±0.25% or ±0.5% full-scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, tare or auto zero and conversion of the pressure units.
Features:High accuracy provides exceptional measurement minimizing costly out of specification conditionsBacklit 4-digit display provides clear parallax-free reading reducing potential for errorsBattery-powered gage with auto-shutoff eliminates wiring and prolongs battery life reducing service callsPush-button zero reduce installation and service time
Specification:Service : Compatible liquids and combustible gases (for FM listing see Agency Approvals below).Wetted Materials : Type 316L SS.Housing Materials : Polycarbonate front and back cover, anodized aluminum extruded housing with recessed grooves, polycarbonate overlay, Buna-N O-rings, 316L SS sensor construction.Accuracy : DPG-000: 0.5% FS; DPG-100: ±0.25% FS; ±1 least significant digit @ 70°F (21°C) (includes linearity, hysteresis, repeatability).Pressure Limit : 2x pressure range for models ≤1000 psi; 5000 psi for 3000 psi range; 7500 psi for 5000 psi range.Thermal Effect : Between 70 to 130°F is 0.016%/F. Between 32 to 70°F is 0.026%/F. Between 10 to 32°F is 0.09%/F. Between 0 to 10°F is 0.50%/F.Power Requirements : (2) AAA alkaline batteries, included, user replaceable.Battery Life : 2000 hours typical; Low battery indicator. (60 hours in continuous use).Auto Shut-Off : Gage: 60 minute auto shut-off. Auto shut-off may be disengaged. Backlight: 2 minute auto shut-off.
Applications:Process applicationsReplacement for legacy analog gagesOEM applications

Additional Information:

• Production Capacity: http://www.dp-engineers.com
• Delivery Time: http://www.dpengineer.in
• Packaging Details: http://www.dpengineerindia.com

Product Details:

Product Details:
Pressure Limits2X pressure range. Vacuum range max. pressure is 30 psig.Thermal Effect0.05% FS/ Degree C.Process Connection1/4" male NPT.Power Requirements9 V alkaline battery, included, user replaceable.Auto Shut Off20 minute auto shut-off.BrandDwyerSize2.62" OD x 1.52" deep.Accuracy+/-1.0% F.S. (Includes linearity, hysteresis, repeatability.)Temperature30 to 120 Degree F (-1 to 49 Degree C).Display Type4-digit LCD (.425" H x .234" W digits).Weight5.6 oz (160 g).Housing MaterialABS plastic.
The SERIES DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.Features: Push-button zero reduce installation and service timeHigh accuracy provides exceptional measurement for minimizing costly out of specification conditionsSelectable unit button provides reading in easily recognizable unitsWell-suited gage for compatible gas (DPGA) or liquid (DPGW) applications specifying simple operation and accuracyService : DPGA: air and compatible gases; DPGW: liquids and compatible gases.Wetted Materials : DPGA: 316L SS, silicone sensor; DPGW: 316L SS.
Applications:Process applicationsProcess start-upOEM applications 
Other Details:
Operating Instructions:
For complete instructions on the two button operation see the flow chart provided on back.On/Off : Press ON/OFF to toggle on and off. Device will automatically shut off after 20 minutes if not used.Zero: Zeros the display - Push & hold for 2 seconds to zero the display. If after pressing zero the display does not re-zero, the unit is no longer meeting specified accuracy and should be sent back to the factory for calibration. Do not use the zero button when pressure is applied.Units : To change units, press both On/Off and Zero buttons simultaneously.Overpressure Indicator : The LCD will flash “OFL”, if the pressure applied is over 105% F.S.
Installation:When installing gage always use 1 ?? hex at the base of the housing to tighten the gage to a mating fitting. Do not apply wrench to housing.
Maintenance:Battery Removal: Remove the screw on backplate. Lift backplate off by hand. To reassemble replace backplate and screw

Additional Information:

• Production Capacity: http://www.dpengineerindia.com
• Delivery Time: http://www.dpengineersindia.in
• Packaging Details: http://www.dpengineers.info

Product Details:

GEMTECH Differential Pressure Gauge Dealers Near by National Chest Institute Hospital
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

• Ambient Temperature -   -21 ~140 -6 ~60

• Rated Pressure -20 inHg~30 inHg (-68~103KPa)

• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

• Accuracy - ±2% of full span at 70(21(±3% on -0, and ±4% on -00)

• Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

• Filter Monitoring
• Air Velocity With Pitot Tube
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct,Room or Building Pressures
• Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 
FILTER BY

• Range - MM Of Water

Additional Information:

• Delivery Time: same day
• Packaging Details: E-mail : dpsharma74@yahoo.co.in, dpsharma1974@gmail.com, dpsharma949@gmail.com Mr D.P.SHARMA 9871014210 WhatsApp number :9871014210,9268631221 Websites : www.dpengineers.in, www.dpengineer.in, www.dpengineers.co.in, www.dpengineer.co.in, www.dpengineersindia.com, www.dpengineerindia.com, www.dpengineersindia.in, www.dpengineers.info, www.dpengineer.info, www.dp-engineers.com, www.dpengineerindia.in, www.dpengineersindia.net, www.dpengineersdelhi.co.in, www.dpengineersdelhi.com, www.dp-engineers.co.in, www.dpengineersdelhi.net, https://www.exportersindia.com/dpengineers

Product Details:

Product Details:
Wetted Materials 316 SS.Accuracy 0.05% FS; +/-1 least significant digit.Temperature Accuracy +/-1 Degree CPressure Limits 120% FSTemperature Limits 14 to 122 Degree F (-10 to 50 Degree C).Compensated Limits 32 to 122 Degree F (0 to 50 Degree C).Process Connection 1/2" male NPT.Display 5-digit LCD with blue backlight.Power Requirement 9 V alkaline batteryAuto Shut Off Backlight On/off, 10 s, 20 s, 30 s.Brand DwyerWeight 1.28 lb (0.58 kg).Battery Life Up to 10,000 hours (600 working hours default 3 times/s).
The SERIES DCGII Digital Calibration Pressure Gage offers a complete pressure gage with calibration capabilities. With a precise 0.05% full scale accuracy and large 5 digit resolution, this gage can be used in critical industrial applications where precision is most important. This versatile gage only requires one 9V battery or power adapter and can operate up to 5,000 working hours. The Series DCGII 0.05% Digital Pressure Gage can display percent of range, pressure swings or alarm set points. This pressure gage comes complete with eleven selectable pressure units, backlight and zeroing capability.
Features:Indicator can display percent of range, pressure swings or alarm set pointsMinimum and maximum peak detectionSelectable 10, 20, or 30 second backlightTemperature indicationEleven selectable pressure unitsStainless steel 1/2" male NPT connectionHighest accuracy provides exceptional measurement for calibration minimizing costly out of specification conditionsStainless steel housing resists ambient corrosion for longer service life in harsh environmentsLightweight and slim, yet large easy to read battery-powered gage make them easy to carry and readSpecified with high ambient temperature rating means more robust uses and longer service-lifeIndicator can display pressure swings, minimum and maximum peak detection with alarm set points provides a multipurpose tool where critical calibration is neededOther Materials:Housing: Aluminum alloy; Display: Acrylic MR200; Buttons: Silicon gel; Back plate: 304 SS; Back seal: Oil-proof latex.
Applications:Field gage calibrationPermanent installationBurst disc testingTorque data loggingPressure regulator testing and hydrostatic leak testing 
Other Details:
Model Range (psig) kPa mPa kg/cm2 in H2O in Hg mm Hg psi mbar barDCGII-100 -14.7 to 0 -101.35 -0.1013 -1.0335 -406.9 -29.929 -760.21 -14.7 1013.5 -1.0135DCGII-101 0 to 15 103.42 0.1034 1.0546 415.2 30.54 775.72 15 1034.2 1.0342DCGII-102 0 to 30 206.84 0.2067 2.1092 830.4 61.08 1551.4 30 2068.4 2.0684DCGII-103 0 to 60 413.69 0.4134 4.2184 1660.8 122.16 3102.9 60 4136.9 4.1369DCGII-104 0 to 100 689.48 0.689 7.0307 2768 203.6 5171.5 100 6894.8 6.8948

Additional Information:

• Production Capacity: http://www.dpengineers.info
• Delivery Time: http://www.dpengineers.in
• Packaging Details: http://www.dpengineerindia.in

Product Details:

Product Details:
Wetted Materials Base 304 SS, Diaphragm Polyimide film.Electrical Connection 8-32 screw terminals.Process Connection 1/4" male NPT.Repeatability +/-10% of set point.Temperature Range -40 to 248 Degree F (-40 to 120 Degree C).Weight 0.13 lb (0.06 kg).Enclosure Rating General purpose or with cover IP65 - Weatherproof.Brand Dwyer
Series A6 Durable Pressure Switches have been specifically designed to stand up to extended duty applications. These switches are constructed with a polyimide film diaphragm and are compatible with a variety of fluids. For ease of installation, the switches come with a 1/4" male NPT process connection and can be mounted in any orientation. The Series A6 pressure switches are compact and have great set-point integrity, and feature simple, easy set-point field adjustment.
Features:High switch cycle means long life for extended duty applicationsMounting in any position and feature simple makes a reliable switching for equipment and OEM applications
Specification:Pressure Limits : Operating Pressure: 150 psi (10.3 bar) for 0.5-24 psi set point ranges, 250 psi (17.2 bar) for 25-150 psi set-point ranges. Proof Pressure: 500 psi (34.5 bar). Burst Pressure: 750 psi (51.7 bar) for 0.5-24 psi set point ranges, 1250 psi (86.2 bar) for 25-150 psi set point ranges.Switch Type : 1 SPST NO, 1 SPST NC. NO and NC switch independent from each other.Electrical Ratings : Resistive: 15 A @ 6 VDC, 8 A @ 12 VDC, 4 A @ 24 VDC; Inductive: 1 A @ 120 VAC, 0.5 A @ 240 VAC.Mounting Orientation : Switch can be installed in any position.Set Point Adjustment : Screw.
Applications:OEMProcess equipmentProcess applications 
Other Details:
Model Set Point Range psi (bar)NC NOA6-151221 0.5 to 1 (0.03 to 0.07) 1.1 to 3.1 (0.08 to 0.21)A6-251221 1.1 to 3 (0.08 to 0.21) 2.27 to 6.05 (0.16 to 0.42)A6-351221 3.1 to 7 (0.21 to 0.48) 4.22 to 10.75 (0.29 to 0.74)A6-451221 8 to 13 (0.55 to 0.90) 12.3 to 17.5 (0.85 to 1.21)A6-551221 14 to 24 (0.97 to 1.66) 18.6 to 31.8 (1.28 to 2.19)A6-651221 25 to 50 (1.73 to 3.45) 33.1 to 61 (2.28 to 4.21)A6-751221 51 to 90 (3.52 to 6.21) 65.6 to 112.3 (4.53 to 7.75)A6-851221 91 to 150 (6.28 to 10.35 114.7 to 198.3 (7.94 to 13.68)

Additional Information:

• Delivery Time: http://www.dp-engineers.com
• Packaging Details: http://www.dpengineerindia.in

Product Details:

Product Details:
Wetted Materials 316L SS.Housing PolycarbonatePressure Limits 1.5 x Range.Display 4 Digit backlit LCD (Digits 0.60"H x 0.33"W).Power Requirement 12 to 30 VDC/AC.Power Consumption 2.5 WattsEnclosure Rating NEMA 4X (IP65).Weight 1.18 lbs (535 g).Brand Dwyer
SERIES EDA Electronic Pressure Control is an extremely versatile compact package that can replace a separate gage, two switches, and a transmitter in a system saving money, installation time, and panel space. The EDA incorporates two SPDT relays that have the on and off points fully adjustable over the range for control or alarm use. Front face has LED indicators for switch status and a large backlight two-line display showing process value and indication units. Programming is easy with simple menu structure, two-line display, and external programming buttons. Weatherproof housing is ideal for a wide variety of applications with panel mount, flush mount, or pipe mount ability. Features include zero set, adjustable dampening, menu lock out, peak and valley indication, removable terminal blocks, adjustable time delay, and scalable transmitter output.
Features:Display Units: psi, kg/cm², bar, in Hg, ft w.c., kPa, MPa, %FS, in w.c., mbar, cm w.c., mm Hg, or oz/in² (choices depend on range).Test Mode: Simulates input over the range without pressuring to easily test switches and transmitter output feature.Fail-safe: For sensor failure, over pressure, high temperature limit, low temperature limit, or keypad short. User chooses if relay is de-energized, energized, or no action. With transmitter option, user chooses an output of 3.6 mA 22 mA, or no action.Alternation: Selectable alternation of set points between the relays for even wear on duplex pump applications.Versatile Compact Package: Can replace a separate gage, two switches, and a transmitter in a system saving, money, installation time, and panel space.Fully Programmable: To meet simple or complex application needs.Weatherproof Housing: Ideal for a wide variety of applications with panel mount, flush mount, or pipe mount ability.
Specification:
Service : Compatible liquids and gases.Accuracy : ±1% of FS including linearity, hysteresis, and repeatability (indicator and transmitter).Stability : < ±2% of FS per year.Temperature Limits : Ambient: 20 to 140°F (-6.6 to 60°C); Process: 0 to 176°F (-18 to 80°C).Compensated Temperature Limits : 32 to 122°F (0 to 50°C).Thermal Effect : ±0.05% of F.S./°F.Electrical Connections : Removable terminal blocks with two 1/2" female NPT conduit connections.Warm Up Time : <10 seconds.Mounting Orientation : Any position.
Applications:Process controlCompressor controlSCFM duct flowFilter statusDuct or building static pressureDamper and fan control

Additional Information:

• Production Capacity: http://www.dpengineerindia.in
• Delivery Time: http://www.dpengineers.co.in
• Packaging Details: http://www.dpengineersdelhi.co.in

Product Details:

Compact, lightweight, and adjustable, the SERIES MVS Miniature Vacuum Switch is specially designed for OEM applications. This low cost switch has a minimum life expectancy of 10 million cycles and has an extremely fast response time. Typical applications for the MVS are HVAC, home appliance, dairy systems, medical, office equipment, and pump control.
Features:High switch cycle means long life for extended duty applications 
Specification:
Electrical Rating : Range 3 to 8" w.c.: 3 A, 125/250 VAC; Range 9 to 80" w.c.: 10 A, 125/250 VAC; Range 81 to 330" w.c.: 15 A, 125/250 VAC.Contacts : Silver with brass terminals.Electrical Connections : Terminals - 0.187" x 0.20: spade for use with quick disconnects.Process Connections : Models MVS-1 to MVS-3: Smooth port 0.25" diameter; Models MVS-4 to MVS-6: 1/8" male NPT.Mounting : Use 2 screws through eyelets.   
 Applications:OEMHVAC applicationsMedical equipmentDairy equipmentPump control

Other Details:
Model Set Point in H2O (mbar)Minimum MaximumMVS-1 3 (8) 8 (20)MVS-2 9 (21) 80 (199)MVS-3 81 (200) 330 (822)MVS-4 3 (8) 8 (20)MVS-5 9 (21) 80 (199)MVS-6 81 (200) 330 (822) 

Additional Information:

• Production Capacity: http://www.dp-engineers.com
• Delivery Time: http://www.dpengineerindia.in
• Packaging Details: http://www.dpengineersindia.in

Product Details:

Product Details:
Switch Type SPDT snap action.Electrical Rating 5 A 250 VAC, 3 A 28 VDC.Cycling 20 CPM.Sensor Element CapsuleElectrical Connection 3-wire, 20 AWG insulated with PVC, 12" (30 cm) length.Process Connection 1/8" male NPT.Weight 3 oz (85 g).Brand Dwyer
Miniature SERIES APS/AVS Adjustable Switches offer reliable switching for pressure/vacuum alarm, shutdown or control. The units are readily adjustable throughout their range using the locking adjusting ring and indicating pointer. The body is constructed of stainless steel for durability in harsh environments. Switches include 12" (30 cm) wire leads sealed with epoxy for additional protection.
Features:Field adjustable with simple indicating pointer reduces installation time bringing application on-line fasterStainless steel construction provides a durable solution in harsh environments
Applications:OEMCompressorsMotor controlProcess equipmentPump control 
Model Range:
APS-150 - Decreasing: 0.8 to 28.5 psi (0.06 to 2.0 bar) Increasing: 1.6 to 30.0 psi (0.11 to 2.1 bar) (APS only)APS-250 - Decreasing: 2.0 to 48.0 psi (0.14 to 3.3 bar) Increasing: 3.0 to 50.0 psi (0.21 to 3.5 bar) (APS only)APS-350 - Decreasing: 3.0 to 96.5 psi (0.21 to 6.7 bar) Increasing: 4.5 to 100 psi (0.31 to 6.9 bar) (APS only)APS-450 - Decreasing: 7.5 to 242 psi (0.52 to 16.7 bar) Increasing: 9.7 to 250 psi (0.67 to 17.2 bar) (APS only)APS-550 - Decreasing: 15.0 to 485 psi (1.0 to 33.4 bar) Increasing: 20.0 to 500 psi (1.4 to 34.5 bar) (APS only)AVS-150 - Decreasing: 1.6 to 27.1 psi (4.1 to 68.6 bar) Increasing: 2.7 to 28.2 psi (6.9 to 71.6 bar) (AVS only)AVS-250 - Decreasing: 4.0 to 24.8 (10.2 to 63.0 bar) Increasing: 5.1 to 28.2 psi (13.0 to 71.6 bar) (AVS only)AVS-350 - Decreasing: 6.0 to 21.5 psi (15.2 to 54.6 bar) Increasing: 8.4 to 28.2 psi (21.3 to 71.6 bar) (AVS only)

Additional Information:

• Production Capacity: http://www.dpengineerindia.com
• Delivery Time: http://www.dpengineersindia.in
• Packaging Details: http://www.dpengineers.info

Product Details:

Product Details:
Wetted Materials Brass and silicone sensor.Accuracy +/-0.5% FS.Long Term Stability +/-0.05% FS/year.Enclosure Rating IP10Temperature 14 to 140 Degree F (- 10 to 60 Degree C).Thermal Effect 0.04% FS/ Degree C.Process Connection 1/4" male NPT.Power Consumption 3 V CR123ABrand DwyerSize 2.5" OD.Display Type 4 Digit LCD (1-1/4 x 5/8").Weight 0.29 lb (0.13 kg).Pressure 2X pressure range, Burst pressure 3X pressure range.Battery Life 2 to 3 yearsHousing Material ABS plastic.
The Model BDG-01 Brass Digital Pressure Gage measures gas pressure with ± 0.5% of full-scale accuracy at an affordable price. With brass wetted material, the series BDG is designed for your specific applications of compatible gases. Its design allows for easy installation. User-selectable units of measure let one gage be used for various pressure scales.
Features:Brass wetted materials for use with compatible gasesBacklit display provides easy viewing of gage measurementSelectable units provide readings in easily recognizable units for userWell-suited gage for application designs specifying simple operation and accuracyRugged weatherproof enclosure enables a range of use outdoor or indoor where water is present
Applications:PneumaticDraft measurementFilter monitoringIndustrialOutdoorHVAC roof-topFlow 
Other Details:
Operation:To turn on the gage, press ON/Off . This button also allows you to scroll through the units, which are located on the right side of the display. To reset zero, press and hold Reset for 2 seconds until display re-zeros. Press and hold ON/Off for 2 seconds to turn off the gage.
Calibration:To ensure accurate pressure readings, be sure to zero gage before first use. This eliminates readings to any change in atmospheric pressure. Only zero gage while it is disconnected from any fitting. It is also recommended to re-zero the gage once a year.
Battery Removal:If the battery is low, the display will show “Lob” and turn off after 3 seconds. To replace the battery, unscrew the plastic cover on the top of the gage housing. Then remove the battery and replace with a new one. Make sure the (+) and (-) polarities
Maintenance/Repair:Upon final installation of the Model BDG no routine maintenance is required. The Model BDG is not field serviceable and should be returned if repair is needed. Field repair should not be attempted and may void warranty.
Warranty/Return:Refer to “Terms and Conditions of Sales” in our catalog and on our website. Contact customer service to receive a Return Goods Authorization number before shipping the product back for repair. Be sure to include a brief description of the problem plus any additional application notes.

Additional Information:

• Delivery Time: http://www.dpengineers.co.in
• Packaging Details: http://www.dpengineersdelhi.co.in

Product Details:

Series SGA Gages are perfect for applications where resistance to corrosion is necessary. The stainless steel case and ring offer excellent protection from harsh processes and the gage can be easily filled in the field for vibration or pulsation applications. The SGA gages are an economical choice where ambient corrosion and vibration are a concern. Also, this line is suitable for all fluids that are compatible with brass.
Other Details:Model Size Range Connection Model Size Range Connection Model Size Range ConnectionSGA-B0221N 1.5 ̋ 0-15 psi Lower SGA-B1021N 1.5 ̋ 0-600 psi Lower SGA-C0621N 2 ̋ 0-160 psi LowerSGA-B0321N 1.5 ̋ 0-30 psi Lower SGA-B1121N 1.5 ̋ 0-800 psi Lower SGA-C0721N 2 ̋ 0-200 psi LowerSGA-B0421N 1.5 ̋ 0-60 psi Lower SGA-B1221N 1.5 ̋ 0-1000 psi Lower SGA-C0821N 2 ̋ 0-300 psi LowerSGA-B0521N 1.5 ̋ 0-100 psi Lower SGA-B1321N 1.5 ̋ 0-1500 psi Lower SGA-C0921N 2 ̋ 0-400 psi LowerSGA-B0621N 1.5 ̋ 0-160 psi Lower SGA-C0221N 2 ̋ 0-15 psi Lower SGA-C1021N 2 ̋ 0-600 psi LowerSGA-B0721N 1.5 ̋ 0-200 psi Lower SGA-C0321N 2 ̋ 0-30 psi Lower SGA-C1121N 2 ̋ 0-800 psi LowerSGA-B0821N 1.5 ̋ 0-300 psi Lower SGA-C0421N 2 ̋ 0-60 psi Lower SGA-C1221N 2 ̋ 0-1000 psi LowerSGA-B0921N 1.5 ̋ 0-400 psi Lower SGA-C0521N 2 ̋ 0-100 psi Lower SGA-C1321N 2" 0-1500 psi Lower

Additional Information:

• Delivery Time: http://www.dpengineers.info
• Packaging Details: http://www.dpengineer.info

Product Details:

Winters Digital Pressure Gauge Model No DPG207R11

• Make  - CANADA
• Model - DPG207R11
• Range - 1 To 10 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

• Ideal for commercial and industrial applications in both test measurement and general purpose installations
• DESCRIPTION & FEATURES:

Simple 2 button operation

• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on

• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• ±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
• 1 year warranty

Additional Information:

• Port of Dispatch: Delhi
• Production Capacity: http://www.dpengineersindia.in
• Delivery Time: http://www.dpengineer.info
• Packaging Details: http://www.dpengineerindia.in

Product Details:

Designed for OEM applications, the Series A2 Subminiature Pressure Switch is economical and is equipped with high proof pressure capabilities for demanding applications. The A2 is available with either spade terminals or flying leads (submersible). Switches with spade terminals can be easily adjusted in the field.
Features:High-proof pressure means capable to meet application demandsEasy to adjust switches means shorter install and service times
Other Details:Model Range psi (bar) Electrical Connection NO/NCA2-5801 2 to 25 (.14 to 1.72) Spade terminals NOA2-58032 2 to 25 (.14 to 1.72) Flying leads NOA2-5811 2 to 25 (.14 to 1.72) Spade terminals NCA2-58132 2 to 25 (.14 to 1.72) Flying leads NCA2-6801 20 to 100 (1.4 to 6.89) Spade terminals NOA2-68032 20 to 100 (1.4 to 6.89) Flying leads NOA2-6811 20 to 100 (1.4 to 6.89) Spade terminals NCA2-68132 20 to 100 (1.4 to 6.89) Flying leads NCA2-7801 50 to 150 (3.5 to 10.3) Spade terminals NOA2-78032 50 to 150 (3.5 to 10.3) Flying leads NOA2-7811 50 to 150 (3.5 to 10.3) Spade terminals NCA2-78132 50 to 150 (3.5 to 10.3) Flying leads NC

Additional Information:

• Production Capacity: http://www.dpengineer.in
• Delivery Time: http://www.dpengineers.co.in
• Packaging Details: http://www.dpengineers.co.in

Product Details:

Winters Digital Pressure Gauge Model No DPG209R11
Make - CANADA
Model - DPG209R11
Range - -1 To 25 bar
Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

• Ideal for commercial and industrial applications in both test measurement and general purpose installations
• DESCRIPTION & FEATURES:

Simple 2 button operation

• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on

• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• ±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
• 1 year warranty

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: http://www.dpengineers.co.in
• Delivery Time: http://www.dpengineersdelhi.co.in
• Packaging Details: http://www.dpengineers.info

Product Details:

Winters Digital Pressure Gauge Model No DPG220R11
Make - Winters CANADA

Model - DPG220R11
Range - 0 To 100 bar
Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

• Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:
Simple 2 button operation

• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on

• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• ±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
• 1 year warranty

Additional Information:

• Port of Dispatch: Delhi
• Production Capacity: http://www.dpengineersindia.in
• Delivery Time: http://www.dp-engineers.com
• Packaging Details: http://www.dpengineerindia.in

Product Details:

The SERIES FDT Flush Diaphragm Transmitter is designed for highly cyclical conditions. Flush sensor feature prevents any potential inaccuracies due to build-up or blockage which is a typical problem found in most non-flush transmitter sensors.
Features:Performs well in high cyclical environments with the presence of water-hammering or spiking for long service life
Applications:OEMHydraulic systemsProcess systems 
Other Details:
Service : Compatible liquids and gases, adhesives, slurries, materials that can harden, or where a pressure cavity is not desired.Wetted Materials : 316 & 15-5 SST.Accuracy : ±0.5% FS (includes non-linearity, hysteresis, and repeatability).Thermal Effect : ±1.5% FSO over compensated range.   Output Signal : FDT-A: 4-20 mADC; FDT-V: 0-5 VDC.Response Time : <1 mS.Loop Resistance : FDT-A: 0-1.5 ohms; FDT-V: ≤100 ohms.Process Connection : 7/16-20 UNF male flush diaphragm. Optional 1/4" male NPT.Mounting Orientation : Mount in any position.

Additional Information:

• Production Capacity: http://www.dpengineers.in
• Delivery Time: http://www.dpengineers.co.in
• Packaging Details: http://www.dpengineer.co.in

Product Details:

The SERIES SGX/SGF Gages have dual English/metric scales with ±1.6% full scale accuracy. The Series SGX/SGF gages are designed with 304 SS housings and brass or 316 SS wetted parts. Ranges of vacuum, compound and pressures to 235" w.c. are available. Included on the dial is a convenient zero adjustment screw which allows the user to easily re-zero the needle.
Features:Stainless steel housing and wetted parts resist ambient corrosion for longer service life in harsh environmentsHigh accuracy gage for applications requiring more precise measurementModels that support vacuum to higher pressure ranges provide a selection to meet specific applicationsSpecified with high ambient and process temperature ratings mean more robust uses and longer service-lifeField adjustable zeroing screw simplifies installation and calibrationAccuracy : ±1.6% FS on positive pressure ranges 15 in w.c. & greater; ±2.5% FS on all other ranges.Applications:PneumaticDraft MeasurementFilter MonitoringLiquid Level Other Details:
CHART - 316 SS GagesModel Range in w.c. (mm)SGF-D7122N -10 to 0 (-250 to 0)SGF-D7322N -25 to 0 (-600 to 0)SGF-D7522N -60 to 0 (-1600 to 0)SGF-D7722N -100 to 0 (-2500 to 0)SGF-D8022N 0 to 10 (0 to 250)SGF-D8122N 0 to 15 (0 to 400)SGF-D8222N 0 to 25 (0 to 600)SGF-D8322N 0 to 40 (0 to 1000)SGF-D8422N 0 to 60 (0 to 1600)SGF-D8622N 0 to 100 (0 to 2500)SGF-D8722N 0 to 160 (0 to 4000CHART - Brass GagesModel Range in w.c. (mm)SGX-D7122N -10 to 0 (-250 to 0)SGX-D7322N -25 to 0 (-600 to 0)SGX-D7522N -60 to 0 (-1600 to 0)SGX-D7722N -100 to 0 (-2500 to 0)SGX-D8022N 0 to 10 (0 to 250)SGX-D8122N 0 to 15 (0 to 400)SGX-D8222N 0 to 25 (0 to 600)SGX-D8322N 0 to 40 (0 to 1000)SGX-D8422N 0 to 60 (0 to 1600)SGX-D8722N 0 to 160 (0 to 4000)SGX-D8922N -4 to 0 to 6 (-100 to 0 to 150)SGX-D9122N -8 to 0 to 16 (-200 to 0 to 400)SGX-D9722N -80 to 0 to 160 (-2000 to 0 to 4000)

Additional Information:

• Production Capacity: http://www.dp-engineers.com
• Delivery Time: http://www.dpengineerindia.in
• Packaging Details: http://www.dpengineers.info

Product Details:

Product Details:
Brand Dwyer Temperature -30 to 150 Degree F (-35 to 66 Degree C).Conduit Connection 7/8" (22.23 mm) hole for 1/2" (12.7 mm) conduit hub.Process Connection 1/4" female NPT.Weight General Purpose 2 lb (0.9 kg).
Reliable and convenient, the Series AP Diaphragm Operated Pressure Switch is a compact switch for instrument air or other low pressure applications. Visible set point and external adjustment add convenience. Used on air, non-corrosive gas or liquid service compatible with wetted parts. Units are available in weather-proof and explosion-proof housing.
Features:Explosion-proof and weatherproof housing provides device protection for outdoor use or harsh environment operation External switch set point adjustment reduces set-up time
Specification:Wetted Materials : Nylon reinforced Buna-N and steel. PTFE and 316 SS optional.Enclosure Rating : General purpose. Weatherproof and explosion-proof optional.Switch Type : SPDT mercury switch or SPDT snap switch. Other switch types available.Electrical Rating : Mercury switch: 4 A @ 120 VAC/DC, 2 A @ 240 VAC/DC.
Snap switch: 15 A @ 120 VAC, 8 A @ 240 VAC, 0.5 A @ 120 VDC, 0.25 A @ 240 VDC.Electrical Connections : Screw terminal.Mounting Orientation : Vertical for mercury switch models, any position for snap switch models.Set Point Adjustment : External screw.Applications:Low pressure applicationsInstrument air
Other Details:Model Switch Type SPDT Ranges Switch Deadband Max. Press. psig(bar)Low HighAP-153-33 Mercury 10 in VAC to 50 in w.c. (2.5 to 12.4 kPa) 5 in w.c. (1.2 kPa) 6 in w.c. (1.49 kPa) 15 (1.03)AP-153-37 Mercury 1 to 30 psig (.07 to 2.1 bar) 0.4 psig (0.03 bar) 0.75 psig (0.05 bar) 60 (4.14)AP-153-39 Mercury 10 to 125 psig (.69 to 8.6 bar) 2 psig (0.14 bar) 6 psig (0.04 bar) 160 (11.0)AP-7021-153-33 Snap 10 in VAC to 50 in w.c. (2.5 to 12.4 kPa) 8 in w.c. (2.0 kPa) 10 in w.c. (2.49 kPa) 15 (1.03)AP-7021-153-37 Snap 1 to 30 psig (.07 to 2.1 bar) 0.75 psig (0.05 bar) 1.5 psig (0.10 bar) 60 (4.14)AP-7021-153-39 Snap 10 to 125 psig (.69 to 8.6 bar) 3 psig (0.21 bar) 7 psig (0.48 bar) 160 (11.0)

Additional Information:

• Delivery Time: http://www.dpengineerindia.com
• Packaging Details: http://www.dpengineersindia.in

Product Details:

Product Details:
Pressure Limit 2 x FS range.Process Connection 1/2" male NPT.Display 5 digit (0.88" high).Power Requirements 12 to 36 VDC (loop powered).Output Signal 4 to 20 mA.Response Time 100 ms.Temperature Limits 14 to 140 Degree F (-10 to 60 Degree C).Thermal Effects 0.04% FS/ Degree F.Weight 1.45 lb (.66 kg).Brand Dwyer
SERIES DSGT Digital Indicating Transmitter is a versatile multi-function process gage that features an excellent 0.25% full scale accuracy. This all-in-one digital gage package is designed to reduce installation costs, instrument cost, and save space where an application requires a gage, transmitter, and switches. The Series DSGT gage comes standards with a loop-powered 4-20 mA transmitter output and is offered with one or two optional SPDT switches.
The Series DSGT gage is housed in a durable fiberglass reinforced thermoplastic case that is designed to meet NEMA 4 (IP65) requirements. The gage features a menu-driven display for easy customization. User selectable features include 12 engineering units of measure, password protected calibration and disable functions, as well as an adjustable bar graph and update/dampening rates.
 
Features:All-in-one digital gage package is designed to reduce installation costs, instrument cost, and save space where an application requires a gage, transmitter, and switchesDurable fiberglass reinforced thermoplastic case to meet NEMA 4 (IP56) requirements supports use in harsh environmentsPassword protected calibration and disable functions helps to insure no errors by untrained personnel

Specification:
Service: Compatible, non-combustible liquids & gases.Wetted Materials : 17 to 4 stainless steel sensor, 316 SS socket.Housing Materials : Fiberglass reinforced thermoplastic case.Accuracy : 0.25% FS (includes linearity, hysteresis, repeatability).Memory Back Up Supply : (2) C alkaline batteries, installed functional, user replaceable.Electrical Connections: 3 ft flying leads.Loop Resistance : DC 0 to 1090 Ω max.Set Point Adjustments : Adjustable through menu selections.
Applications:ProcessCompressorOutdoorOEM

Additional Information:

• Production Capacity: http://www.dpengineers.co.in
• Delivery Time: http://www.dpengineer.info
• Packaging Details: http://www.dp-engineers.com

Product Details:

Product Details:
Wetted Materials 316L SSPower Requirements 11.9 to 45 VDC.Response Time 0.12 seconds.Damping Time 0.25 to 60 seconds.Brand DwyerDisplay Type Optional 5 digit LCD.Stability +/-0.125% FSO/yr.Weight 5.5 lb (2.5 kg).Process Connection 1/2" female NPT.
The Mercoid® SERIES 3200G Smart Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and programmable using HART® Communication. The Series 3200G is capable of being configured with the zero and span buttons, a field calibrator is not required for configuration. The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3200G is FM approved for use in hazardous (Classified) locations. The 100:1 rangeability allows the smart transmitter to be configured to fit any application.
Features:Completely configurable using zero/span buttons (no calibrator required)Automatic ambient temperature compensationFail-mode process function
Specification:Service : Compatible gases, steam, liquids or vapors.Accuracy : ±0.075% FS (@ 20°C).Rangeability : 100:1 turn down.Temperature Limits : Process: -40 to 248°F (-40 to 120°C); Ambient: Without LCD -40 to 185°F (-40 to 85°C), With LCD -22 to 176°F (-30 to 80°C).Thermal Effect : ±0.125% span/32°C.Output Signal : 4 to 20 mA / HART® Communication.Loop Resistance : Operation: 0 to 1500 Ω HART® Communication: 250 to 500 Ω.Electrical Connection : Two 1/2" female NPT conduit, screw terminal.Enclosure Rating : NEMA 4X (IP66) and explosion-proof for Class I, Div I Groups A, B, C and D.
Applications:Water and wastewaterChemical and petrochemicalPulp and paperOil and gasFood and beverage 
Other Details:
Model Range psi (kPa) Calibrated Span (Min. to Max.) psi (kPa) Max. Pressure psi (bar) LCD Display3200G-1-FM-1-1 -14.5 to 21 (-100 to 150) 0.22 to 21 (1.5 to 150) 58 (4) No3200G-2-FM-1-1 -14.5 to 217 (-100 to 1500) 2 to 217 (15 to 1500) 580 (40) No3200G-3-FM-1-1 0 to 725 (0 to 5000) 7.25 to 725 (50 to 5000) 2000 (138) No3200G-4-FM-1-1 0 to 3600 (0 to 25000) 36 to 3600 (250 to 25000) 10000 (690) No3200G-5-FM-1-1 0 to 8500 (0 to 60000) 87 to 8700 (600 to 60000) 11600 (800) No3200G-1-FM-1-1-LCD -14.5 to 21 (-100 to 150) 0.22 to 21 (1.5 to 150) 58 (4) Yes3200G-2-FM-1-1-LCD -14.5 to 217 (-100 to 1500) 2 to 217 (15 to 1500) 580 (40) Yes3200G-3-FM-1-1-LCD 0 to 725 (0 to 5000) 7.25 to 725 (50 to 5000) 2000 (138) Yes

Additional Information:

• Delivery Time: http://www.dpengineersindia.in
• Packaging Details: http://www.dpengineers.info

Product Details:

The SERIES 644 Industrial Pressure Transmitter is a robust transmitter designed for high accuracy pressure applications. Boasting an accuracy of ±0.05% FS RSS (<±0.25% TEB), the 644 is intended for precise measurements in the critical applications of calibration technology, hydraulic/pneumatic controls, and many more laboratory and industrial settings. The Series 644 offers multiple measurement options with two output choices (VDC or mA) and ten psig pressure ranges (optional 0 to 15 psia). The robust and compact all stainless steel Series 644 is available with either a 1/4" male NPT, or 7/16"-20 male SAE process connections. Each transmitter is provided with an 11 point NIST traceable calibration certificate.
Features:High accuracy provides exceptional measurement for insuring tight-control and minimizing costly out of specification conditionsLow thermal error over a wide range of temperatures helps to insure accurate pressure measurement and process operationNIST calibrated to provide traceability for regulated processes where production and documentation is monitored
Specification:Total Error Band (Includes all thermal effects) : <±0.25% FS over entire temperature compensated range.Stability : <0.15% FS/year.Pressure Limits : Proof pressure and burst pressureCompensated Temperature Range : -4 to 140°F (-20 to 60°C).Power Requirements : 9 to 30 VDC for current output; 15 to 30 VDC for voltage output.Minimum Supply Voltage : Min. supply voltage (VDC) for current output = 9 + 0.02 x loop resistance Ω (loop resistance Ω = line resistance + receiver resistance).Response Time : <10 ms (voltage output), <80 ms (current output).Max Current Consumption : 4 to 20 mA: 22 mA; 0 to 10 VDC: 20 mA.Electrical Connections : 3 ft cable or 6-pin male bayonet connector.Process Connection : 1/4" male NPT or 7/16"-20 male SAE with O-Ring.
Applications:Calibration equipmentTest benchesPulp and paper millsHydraulic/pneumatic controlsTransportationPower generation

Additional Information:

• Production Capacity: http://www.dpengineer.co.in
• Delivery Time: http://www.dpengineerindia.com
• Packaging Details: http://www.dpengineersindia.in

Product Details:

The Dwyer SERIES IS626 Intrinsically Safe Pressure Transmitter can be used to accurately measure compatible gases and liquids compatible with its 316/316L Stainless Steel wetted parts. Series IS626 full scale accuracy is 0.25%. Designed for industrial environments with a NEMA 4X (IP66) housing, this transmitter resists most effects of shock and vibration. Models are available with a 3' cable or M-12 4 pin connection.
The IS626 is UL listed for use in Hazardous (Classified) Locations. The protection method is by Intrinsic Safety,"ia". It was investigated by UL under UL Standard 913 Sixth Edition and CSA Standard No. 157-92.
Features:Exceptional accuracy for insuring tight-control and minimizing costly out of specification conditionsLoop Resistance : 0 - 900 Ω maximum.NEMA 4X rated enclosure provides protection in harsh environments permitting outdoor monitoring or in areas where dust and particulate matter existsRobust sensor provides shock and vibration resistance insuring stability in controlling pressure for process applicationsAccuracy : 0.25% FS; absolute range: 0.5% FS (includes linearity, hysteresis, and repeatability).Thermal Effect : ±0.02% FS/°F (includes zero and span). Applications:Monitoring pressure in hazardous environmentsProcess Other Details:Model Range Maximum Pressure (psig) Over Pressure (psig)IS626-00-GH-P1-E1-S1 15 psia 30 150IS626-07-GH-P1-E1-S1 15 psig 30 150IS626-08-GH-P1-E1-S1 30 psig 60 300IS626-09-GH-P1-E1-S1 50 psig 100 300IS626-10-GH-P1-E1-S1 100 psig 200 500IS626-11-GH-P1-E1-S1 150 psig 300 750IS626-12-GH-P1-E1-S1 200 psig 400 1000IS626-13-GH-P1-E1-S1 300 psig 600 1500IS626-14-GH-P1-E1-S1 500 psig 1000 2500IS626-15-GH-P1-E1-S1 1000 psig 2000 5000IS626-16-GH-P1-E1-S1 1500 psig 3000 5000

Additional Information:

• Production Capacity: http://www.dpengineers.in
• Delivery Time: http://www.dpengineer.in
• Packaging Details: http://www.dpengineerindia.com

Product Details:

The Series LPG5 Low Pressure Gages offer top of the line performance for pressure applications from 10 in. w.c. to 10 psi. The LPG5 gages possess dual scales with 3-2-3% full-scale accuracy on a 2.5" dial. Units are made with a chrome plated steel housing and brass wetted parts. Units can withstand temperatures of -4 to 140°F (-20 to 60°C). This series is meant for the measurement of low pressures of gases and liquids and is ideal for air flow indication, liquid level and draft measurement. Series LPG5 gages are available with either a bottom or back connection option.
Features:Chrome plated steel housing and brass wetted parts resist ambient for longer service life in harsh environments Low pressure gage provides a selection to meet specific applications Specified with high ambient and process temperature ratings mean more robust uses and longer service-life Good accuracy gage for value-sensitive applications requiring more precise measurement and where vibration is a concern
Applications:Air flow indication Liquid level Draft measurement

Other Details:
Model Range in w.c. (kPa) Model Range psi (kPa)LPG5-D8022N 0 to 10 (0 to 2.5) LPG5-D9922N 0 to 5 (0 to 35)LPG5-D8122N 0 to 15 (0 to 3.75) LPG5-D0022N 0 to 10 (0 to 70LPG5-D8222N 0 to 35 (0 to 8.75)LPG5-D8422N 0 to 60 (0 to 15)LPG5-D8622N 0 to 100 (0 to 25)LPG5-D8822N 0 to 200 (0 to 50)

Additional Information:

• Production Capacity: http://www.dpengineer.info
• Delivery Time: http://www.dp-engineers.com
• Packaging Details: http://www.dpengineerindia.in

Product Details:

The SERIES 681 Sanitary Pressure Transmitter is designed to meet 3A standards for applications in food, dairy, beverage and pharmaceutical processing, liquid level control, and sanitary pipelines. The unit is fully sealed to withstand high pressure wash-down in Clean-in-Place (CIP) and Sterilize-in-Place (SIP) installations. The Series 681 is designed with a unique, no liquid fill diaphragm and a Sanitary Clamp pressure fitting for easy installation with negligible clamping effect. A conduit fitting, shielded cable with vent tube and sealed screws for zero and span adjustment combine to make the Series 681 completely watertight.
Features:Fully sealed to withstand Clean-in-Place and Sterilize-in-Place installations supports regulatory conditions for sanitary processesSanitary clamp fitting makes for easy installation
Specification:Accuracy : ±.20% FS (includes non-linearity, hysteresis and non-repeatability).Temperature Limits : -40 to 260°F (-40 to 125°C) 10 to 90% RH, non-condensing.Thermal Effect : Zero and span shift: ±2.0% FS/100°F (% FS/50°C).Zero and Span Adjustment : ±0.5 mA, non-interactive.Response Time : ≤10 ms.Electrical Connections : 1/2" conduit fitting and strain relief with 15 ft (4.5 m) cable.Pressure Connection : 2" or 1-1/2" Sanitary Clamp fitting male NPT .Clamping Effect : Zero and span shift: ±0.15% FS for ranges up to 30 psi; ±0.25% FS for ranges >30 psi.
Applications:Sanitary process applications Food and beverage processing Water processing Dairy processing Pharmaceutical processing 
Other Details:
Model Range Over Pressure Sanitary Clamp Connection681-02 0 to 1 psi 50 psi 2 ̋681-12 0 to 2 psi 100 psi 2 ̋681-42 0 to 15 psi 150 psi 2 ̋681-52 0 to 30 psi 150 psi 2 ̋681-62 0 to 60 psi 180 psi 2 ̋

Additional Information:

• Production Capacity: http://www.dpengineersindia.in
• Delivery Time: http://www.dpengineers.info
• Packaging Details: http://www.dp-engineers.com

Product Details:

Winters Digital Pressure Gauge Model No DPG223R11

• Make  - Winters CANADA
• Model - DPG223R11
• Range - 0 To 400 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

• Ideal for commercial and industrial applications in both test measurement and general purpose installations
• DESCRIPTION & FEATURES:

 

• Simple 2 button operation
• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on

• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• ±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
• 1 year warranty

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: http://www.dpengineer.co.in
• Delivery Time: http://www.dpengineers.in
• Packaging Details: http://www.dpengineer.in

Product Details:

Winters Digital Pressure Gauge -1 To 10 bar

• Make - CANADA
• Model - DPG207R11
• Range - -1 To 10 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

• Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:
Simple 2 button operation

• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on
• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• ±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
• 1 year warranty

Additional Information:

• Port of Dispatch: Delhi
• Production Capacity: http://www.dpengineerindia.com
• Delivery Time: http://www.dpengineersindia.in
• Packaging Details: http://www.dpengineers.info

Product Details:

Winters Digital pressure gauges 1000 to 3000 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

• Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

• Simple 2 button operation
• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on

• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• ±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
• 1 year warranty

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Production Capacity: http://www.dpengineers.in
• Delivery Time: http://www.dpengineer.in
• Packaging Details: http://www.dpengineer.co.in

Product Details:

Low cost and precision made, the SERIES A1F Pressure Switch is ideal for OEM industrial applications. Wetted materials of 316 SS and fluorocarbon ensure great chemical compatibility with a wide range of process media. The open case style is perfect for panel mounting applications like pump skids. Weatherproof enclosure is available in polycarbonate offering a low cost weatherproof switch. Superior 15 A contact allows direct control of motors or pumps without the use of external relays, a true cost savings.
Features:15 A contact allows direct control reducing costs and reliability by having to introduce additional contacts and relaysCase style allows use for panel mounting application with optional weather-proof enclosure for use in outdoor environmentsField adjustable reduces installation time bring application on-line fasterWetted material provides support for wider range of process media
Specification:Service : Compatible liquids and gases.Wetted Materials : Pressure Chamber: 316 SS; Diaphragm: Fluorocarbon.Enclosure Rating : No rating for open construction. Installed properly within an optional enclosure meets NEMA 4X standards.Electrical Rating : 15 A @ 120/240/480 VAC, 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC.Electrical Connection : Screw terminals.Mounting Orientation : Within 20° of vertical.Set Point Adjustment : Knurled screw cap with indicating scale.Deadband : Fixed, see products on Order page for minimum and maximum deadband.Applications:OEMCompressorsMotor controlProcess equipmentPump control Options:Weatherproof Enclosure. Optional enclosure factory installed. To order change "O" to "PC". Example: A1F-PC-SS-1-1. 
Other Details:
Model Range psg (bar) Deadband at Min. Range psg (bar) Deadband at Max. Range psg (bar)A1F-O-SS-1-1 2 to 15 (0.14 to 1.03) 2 (0.14) 3 (0.21)A1F-O-SS-1-2 4 to 75 (0.28 to 5.17) 4 (0.27) 15 (1.0)A1F-O-SS-1-3 8 to 225 (0.55 to 15.5) 8 (0.55) 25 (1.7)A1F-O-SS-1-4 16 to 450 (1.1 to 31.0) 15 (1.0) 50 (3.5)

Additional Information:

• Delivery Time: http://www.dpengineers.info
• Packaging Details: http://www.dpengineer.info

Product Details:

The SERIES 672 Low Pressure Transducer is a perfect solution to any application where a very accurate low pressure transducer is necessary. Using variable capacitance technology, the Series 672 is designed to measure pressures as low as 10 in w.c. up to 400 in w.c., very low ranges for a single connection pressure transducer. The 672 also features a 0.25% F.S. accuracy. Use the Series 672 in liquid level, flood warning, waste water, clean room, and open channel flow applications.
Features:Low range high accuracy provides precise control for process applications
Specification:Accuracy : ±0.25% F.S. (RSS).
Includes non-linearity, hysteresis, and non-repeatability.  
Pressure Limits : 29 psi (2 bar) for up to 85" w.c. (0.2 bar) ranges; 58 psi (4 bar) for 85" to 140" w.c. (0.2 to 0.35 bar); 73 psi (5 bar) for 141" to 400" w.c. (0.35 to 1 bar).Thermal Effects : Zero: 1.0%F.S./100°F (2.0%F.S./100°C); Span: 1.0%F.S./100°F (2.0%F.S./100°C).Power Requirements : 4-20 mA: 9-35 VDC; 0-5 VDC: 7.5-35 VDC.Output Signal : 4-20 mA (2-wire) or 0-5 VDC (3-wire).Zero & Span Adjustment : ±10% F.S. each (by Potentiometer).Max Loop Resistance : 1.325 kΩ.Electrical Connections : Large DIN 43650 connector with mating plug. Applications:Liquid level Flood warning Waste water Clean room Open flow applications 
Other Details:
Model Operating Range Output672-1-A 0 to 10 in w.c. 4-20 mA, 2-wire672-2-A 0 to 15 in w.c. 4-20 mA, 2-wire672-3-A 0 to 25 in w.c. 4-20 mA, 2-wire672-4-A 0 to 50 in w.c. 4-20 mA, 2-wire672-5-A 0 to 100 in w.c. 4-20 mA, 2-wire672-6-A 0 to 150 in w.c. 4-20 mA, 2-wire672-7-A 0 to 200 in w.c. 4-20 mA, 2-wire672-8-A 0 to 300 in w.c. 4-20 mA, 2-wire672-9-A 0 to 400 in w.c. 4-20 mA, 2-wire

Additional Information:

• Packaging Details: http://www.dpengineersdelhi.co.in

Product Details:

The Series WDG Weatherproof Digital Pressure Gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The WDG comes with 304L stainless steel wetted material for a wide range of compatible liquids and gases.We are in the process of discontinuing this series, the suggested replacement is Series DPGA/DPGB.
Specification:
Accuracy : ±0.5% FS for ranges up to 1000 psig (68.94 bar); ±1% FS for 5000 psig (344.74 bar) range.Power Requirements : 3 V Lithium metal battery, installed functional, user replaceable
Applications:PneumaticDraft measurementFilter monitoringIndustrialOutdoorHVAC roof-topFlow 
Other Details:
Model Pressure RangesRange (psig) bar mPa kg/cm2BDG-01 0 to 150 10.342 1.034 10.545WDG-01 0 to 50 3.45 0.34 3.52WDG-02 0 to 100 6.89 0.69 7.03WDG-03 0 to 300 20.68 2.07 21.09WDG-05 0 to 1000 68.94 6.89 70.3WDG-06 0 to 5000 344.74 34.47 351.5

Additional Information:

• Production Capacity: http://www.dpengineerindia.com
• Delivery Time: http://www.dpengineersindia.in
• Packaging Details: http://www.dpengineers.info

Product Details:

Designed for OEM applications, the Series A2 Subminiature Pressure Switch is economical and is equipped with high proof pressure capabilities for demanding applications. The A2 is available with either spade terminals or flying leads (submersible). Switches with spade terminals can be easily adjusted in the field.
Features:High-proof pressure means capable to meet application demands Easy to adjust switches means shorter install and service times
Other Details:Model Range psi (bar) Electrical Connection NO/NCA2-5801 2 to 25 (.14 to 1.72) Spade terminals NOA2-58032 2 to 25 (.14 to 1.72) Flying leads NOA2-5811 2 to 25 (.14 to 1.72) Spade terminals NCA2-58132 2 to 25 (.14 to 1.72) Flying leads NCA2-6801 20 to 100 (1.4 to 6.89) Spade terminals NOA2-68032 20 to 100 (1.4 to 6.89) Flying leads NOA2-6811 20 to 100 (1.4 to 6.89) Spade terminals NCA2-68132 20 to 100 (1.4 to 6.89) Flying leads NCA2-7801 50 to 150 (3.5 to 10.3) Spade terminals NOA2-78032 50 to 150 (3.5 to 10.3) Flying leads NOA2-7811 50 to 150 (3.5 to 10.3) Spade terminals NCA2-78132 50 to 150 (3.5 to 10.3) Flying leads NC