D.P. Engineers

Applications:

• Live stocks
• Greenhouses
• Gas Turbine
• Pre Cooler For Air Cooled Condenser
• Spray Painting Booth
• Industrial Applications
• Commercial Applications
• Humidification.

• Dimensions: 600 MM X 600 MM X 50 MM
• Dimensions: 900 MM X 600 MM X 50 MM
• Dimensions: 1200 MM X 600 MM X 50 MM
• Dimensions: 1500MM X 600 MM X 50 MM
• Dimensions: 1800 MM X 600 MM X 50 MM
• Dimensions: 600 MM X 600 MM X 100 MM
• Dimensions: 900 MM X 600 MM X 100 MM
• Dimensions: 1200 MM X 600 MM X 100 MM
• Dimensions: 1500MM X 600 MM X 100 MM
• Dimensions: 1800 MM X 600 MM X 100 MM
• Dimensions: 600 MM X 600 MM X 200 MM
• Dimensions: 900 MM X 600 MM X 200 MM
• Dimensions: 1200 MM X 600 MM X 200 MM
• Dimensions: 1500MM X 600 MM X 200 MM
• Dimensions: 1800 MM X 600 MM X 200 MM
• Dimensions: 600 MM X 600 MM X 300 MM
• Dimensions: 900 MM X 600 MM X 300 MM
• Dimensions: 1200 MM X 600 MM X 300 MM
• Dimensions: 1500 MM X 600 MM X 300 MM
• Dimensions: 1800 MM X 600 MM X 300 MM

• Exported to Europe, Australia, Middle East and USA
• Available in Standard and Customised Sizes
• Durable
• Compatible
• Economical
• All-India Network
• Technical Support
• No Edge Build Up
• Good Quality Gluing
• Quick Deliveries
• Water Retention
• Samples Available On Request

• Green Houses,
• Mushroom Farming,
• Agrihot And Floriculture
• Poultry Farms, Hatcheries,
• Breeding Areas, Livestock And Dairy Farms
• Commercial And Industrial Areas
• Industrial Coolers

Construction: Are Made From High Quality Synthetic Non-Woven Media, Supported By a Fine HDPE Media On Both Sides. Media Is Then Housed Inside An Extruded Aluminium Frame.
Specifications :
Efficiency : Standard HDPE Pleated Type Pre Filters Have an Efficiency of 90% for 10 Micron Size Particles. Pre Filters With An Efficiency Rating of 80 to 90% to Capture 10 Micron to 20 Micron Size Particles Are Also Available On Order.

• Filtration Class : Filter Grades G3, G4, F5 of EN779, ASHRAE 52.2 Equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 Are Available
• Frame Type : Available in Flange Or Box Type
• Frame Material : Standard Model is Constructed in Galvanized Steel. Other Models With Aluminium Anodized/Stainless Steel Frame With or Without Powder Coating Are Also Available On Order.
• Filter Media : HDPE And Non-Woven Synthetic.
• Gasket : No Gasket is Installed in Standard Filter Model. Non-Woven Syntheti/Rubber Gasket Can Be Ordered On Request
• Separators : None
• Sealant : PU Based Epoxy
• Face Guard : No Face Guard With Standard Model is Supplied. On Order/Request Filter Can Be Protected With Expanded Mesh On Both Sides
• Nominal Depth : Depth Size is Available From 1.0 Inches to 6 Inches (Pre HDPE Pleated And Rod Type)
• Sizes : Standard Size Of The Filter is 610 x 610 x 50 MM in Box or Flange Type. Other Sizes Are Build On Order.
• Pressure Drop : Initial Pressure Drop ~2.5 MM WG and Recommended Final Pressure Drop is 5-10 MM WG
• Operating Conditions : Filter Can Withstand Temperature Up to 80ºC And Relative Humidity of 100% at 0 Condensation. Filter is Washable or Can Be Cleaned By Applying Air Pressure And Reused.

• Air Handling Units (AHUs), Air-Conditioning Systems.
• Power Plants, Chemical and Fertilizer Complexes.
• Green Houses, Automatic Drain Holes, Paint Shops.
• Textile Mills.
• Cement Factories.
• Laminar Air Flow Units.
• Biosafety Hoods.
• Fan Filter Units (FFU).
• Gas Turbine Industry.
• Compressor, Diesel Engines.
• Nuclear Power Station.
• CD-Rom Production Industry.
• Picture Tube Production Industry.
• Semi-conductor Industry.
• Aeronautical Industry And Miscellaneous Industrial Ventilation.