D.P. Engineers

Magnehelic Differential Pressure Gauges In Vani AhmedabadProduct Details:Minimum Order Quantity 12 PieceDial Size 4 inch / 100 mmBrand Dwyer USAPressure Range MM WC/ CM / PAC / KPA / INCHUse Pharmaceutical IndustriesDisplay Type AnalogPressure Type Differential PressureConnection Type NPTConnection Size 1/8 inchDial Type DryMounting BackModel Name/Number SERIES 2000Weight 700 G
Magnehelic Differential Pressure Gauges In Vani AhmedabadSERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGESIndicate Positive, Negative or Differential, Accurate within 1%No Power RequiredLow CostUsed in Isolation/ Hospital Environments and Temporary Units (No Power Required)Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.PRODUCT APPLICATIONSFilter MonitoringAir Velocity with Dwyer Pitot TubeBlower Vacuum MonitoringFan Pressure IndicationDuct, Room or Building PressuresClean Room Positive Pressure Indication

Maghnehic Differential pressure gauge in Mehsana - II industrial area Gujarat India
SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

• No Power Required
• Low Cost

• Used in Isolation/ Hospital Environments and Temporary Units (No Power Required)

Select The Series 2000 Magnehelic® Gage For a Versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s Simple, Frictionless Magnehelic® Gage Movement, It Quickly Indicates Air Or Noncorrosive Gas Pressures--Either Positive, Negative (Vacuum) or Differential. The Design Resists Shock, Vibration, Over-Pressures And is Weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage Option For An Accuracy Within 1% of Full Scale, Located Below in the Product Configurator. Also Included With The –HA Option At No Extra Cost Are a Mirrored Scale Overlay and a 6 Point Calibration Certificate.
NIST CALIBRATION Available In Product Configurator.
Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
Please See Series AT-2000 for ATEX Approved.
PRODUCT APPLICATIONS

• Filter Monitoring
• Air Velocity with Dwyer Pitot Tube
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct,Room or Building Pressures
• Clean Room Positive Pressure Indication

SPECIFICATIONS

• Service:Air And Non-Combustible, Compatible Gases (Natural Gas Option Available). Note: May Be Used With Hydrogen. Order a Buna-N Diaphragm. Pressures Must Be Less Than 35 PSI.
• Wetted Materials:Consult Factory.
• Housing:Die Cast Aluminum Case And Bezel, With Acrylic Cover, Exterior Finish is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test.
• Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C).
• Pressure Limits:-20 in Hg. to 15 PSIG.† (-0.677 bar to 1.034 bar); MP Option: 35 PSIG (2.41 Bar), HP Option: 80 PSIG (5.52 Bar).
• Enclosure Rating:IP67.
• Overpressure:Relief Plug Opens At Approximately 25 PSIG (1.72 Bar), Standard Gages Only. See Overpressure Protection Note On Catalog Page.
• Temperature Limits:20 to 140°F (-6.67 to 60°C). -20°F (-28°C) With Low Temperature Option.
• Size:4" (101.6 MM) Diameter Dial Face.
• Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
• Process Connections:1/8" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back.
• Weight:1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
• Standard Accessories:Two 1/8" NPT Plugs For Duplicate Pressure Taps, Two 1/8" Pipe Thread To Rubber Tubing Adapters And Three Flush Mounting Adapterswith Screws. (Mounting And Snap Ring Retainer Substituted For Three Adapters In MP & HP Gage Accessories.)
• Agency Approval:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II). 
• Note: -SP Models Not RoHS Approved.Note: For Applications With High Cycle Rate Within Gage Total Pressure Rating, Next Higher Rating Is Recommended

Magnehelic Differential pressure gauge in Shihor-I industrial area Bhavnagar GujaratProduct SpecificationBrand DwyerPressure Range 0 to 30 psi (0 to 30 kPa )Use HVAC SystemsDisplay Type AnalogPressure Type Differential PressureConnection Type NPTConnection Size 1/8 inchDial Type DryAccuracy Plus Minus 2 to 4% FS , Plus Minus 1 to 2% FS with HA optionLens Clear acrylicServices Air and non-combustible, compatible gasesWatted Material Consult factoryHousing Die cast aluminium case and bezelTemperature Limit 20 to 140 Degree Fahrenheit (-6.67 to 60 Degree Celsius)Pressure limits -20" Hg to 15 psig, MP option - 35 psig, HP option - 80 psigMinimum Order Quantity 10 PieceProduct DescriptionDwyer make Magnehelic Differential Pressure GaugesModel : 2000-SeriesRange : 0....6... upto 1000 mmWCUnits : PA / mmWc / KPA AvailableDial Size : 100 MMConn. : 1/8" NPT(F)

Magnehelic Differential Pressure Gauge In Mahuva Industrial Area Bhavnagar Gujarat IndiaProduct SpecificationBrand DwyerPressure Range 0 to 30 psi (0 to 30 kPa )Use HVAC SystemsDisplay Type AnalogPressure Type Differential PressureConnection Type NPTConnection Size 1/8 inchDial Type DryAccuracy Plus Minus 2 to 4% FS , Plus Minus 1 to 2% FS with HA optionLens Clear acrylicServices Air and non-combustible, compatible gasesWatted Material Consult factoryHousing Die cast aluminium case and bezelTemperature Limit 20 to 140 Degree Fahrenheit (-6.67 to 60 Degree Celsius)Pressure limits -20" Hg to 15 psig, MP option - 35 psig, HP option - 80 psigMinimum Order Quantity 10 PieceProduct DescriptionDwyer make Magnehelic Differential Pressure GaugesModel : 2000-SeriesRange : 0....6... upto 1000 mmWCUnits : PA / mmWc / KPA AvailableDial Size : 100 MMConn. : 1/8" NPT(F)

Magnehelic Differential pressure gauge in Chandisar industrial area Banaskantha GujaratProduct SpecificationBrand DwyerPressure Range 0 to 30 psi (0 to 30 kPa )Use HVAC SystemsDisplay Type AnalogPressure Type Differential PressureConnection Type NPTConnection Size 1/8 inchDial Type DryAccuracy Plus Minus 2 to 4% FS , Plus Minus 1 to 2% FS with HA optionLens Clear acrylicServices Air and non-combustible, compatible gasesWatted Material Consult factoryHousing Die cast aluminium case and bezelTemperature Limit 20 to 140 Degree Fahrenheit (-6.67 to 60 Degree Celsius)Pressure limits -20" Hg to 15 psig, MP option - 35 psig, HP option - 80 psigMinimum Order Quantity 10 PieceProduct DescriptionDwyer make Magnehelic Differential Pressure GaugesModel : 2000-SeriesRange : 0....6... upto 1000 mmWCUnits : PA / mmWc / KPA AvailableDial Size : 100 MMConn. : 1/8" NPT(F)

Magnehelic Differential pressure gauge in Kukarwada industrial area Mehsana Gujarat India