D.P. Engineers

Dwyer 160-48 Stainless Steel Pitot TubeDwyer Instruments 160-48SS Pitot Tube,5/16"dia.,48-5/8" insertionOrder #: 160-48Mfg #: 160-48Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.Availability: Ships in 5-6 WeeksProduct HighlightsNo Calibration NeededPrecisely Located, Burr-Free Static Pressure HolesHemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To DamageLong Lasting 304 Stainless Steel ConstructionSilver Soldered Connections For Leak-Proof OperationASME Design Meets AMCA And ASHRAE SpecificationCoefficient of "15/16" Models Rated To 1500 FExtended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow DirectionInch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion DepthDwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions IncludedUse 1/8" Models in Ducts As Small as 4", 5/16" Models in Ducts 10" Or LargerOptional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple5/16" Diameter48-5/8" insertion length

Dwyer Stainless Steel Pitot Tube

Product Description

Dwyer Stainless Steel Pitot Tube is ideal to be used in the industrial operations with our precision manometers and Air Velocity Gages. Various Standard Sizes Are Available For Use in Ducts.

Features:

• No Calibration Needed.
• Precisely located, burr-free static Pressure Holes.
• Hemispherical tip design, Best for Accuracy if imperfectly Aligned and Nearly Impossible to Damage.
• Long lasting construction.
• Dwyer Air Velocity Calculator, direct reading flow charts and instructions included.
• Use 1/8" Models in ducts as small as 4" and 5/16" Models in Ducts 10" or larger.
• Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple.
• ASME Design Meets AMCA & ASHRAE Specifications.

APPLICATIONS

• Monitor or Control Air Velocity or Air Flow When Combined With Differential Pressure Gage, Switch, Or Transmitter

Dwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying CaseApplications Pitot Tube Set of Standard TubesHVACIndustrial & CommercialResidentialThe Dwyer 160-KIT Pitot Tube Set of Standard Tubes includes 18”, 24”,36”,and 48” Dwyer Pitot Tubes.These Pitot Tubes are Constructed out of a Durable Stainless Steel With Etched insertion Depth Graduations and silver Soldered Connections to help prevent leaks.They Feature a low Sensitivity to Misalignment up to 15 degrees, require no Calibration due to their ASHRAE tip design,and are rated up to 1500°F (815.5°C).Manufacturer SpecsDwyer 160-KIT Pitot Tube Set of Standard Tubes SpecificationsModel in Kit    Insertion Length160-18   18-5/8''''160-24   24-5/8''''160-36   36-5/8''''160-48   48-5/8''''SPECIFICATION :Brand:Dwyer USAModel No:160-KITOur Model No:160KITCondition:NEWKEY FEATURES :Insertion Lengths:18-5/8",24-5/8",36-5/8",48-5/8"No Calibration NeededPrecisely located,burr-free static pressure holesHemispherical Tip Design,Best For Accuracy if Imperfectly Aligned and Nearly Impossible To DamageLong lasting 304 SS ConstructionSilver soldered connections for leak-proof operationExtended Static Connection Helps Guide Tip Within Recommended 15° of Air Flow DirectionInch Graduations on Sides of 160 Series to quickly Determine Exact insertion depthDwyer Air Velocity Calculator,Direct Reading Flow Charts and instructions includedUse 1/8" Models in Ducts as Small as 4",5/16" Models in Ducts 10" or LargerOptional Mounting Gland of Split Flange Make Permanent Installation Fast and Simple Sold SeparatelyMeets ASME "Fluid Meters" 6th ed.ANSI/AMCA 210-99, ANSI/ASHRAE 51/1999,and British Standard 1042Includes Carrying CaseDETAILS :The Dwyer 160-KIT Stainless Steel Pitot Tubes are Constructed From Corrosion Resistant Stainless Steel With Permanently etched insertion Depth Graduations for a Lifetime of Service.The Static Pressure Port is Parallel to the Sensing Tube to allow Quick,Easy Alignment of The Tube With Air Flow.The 160KIT has Probes With Insertion lengths of 18-5/8",24-5/8",36-5/8",and 48-5/8"INCLUDED1-18" Pitot Tube1-24" Pitot Tube1-36" Pitot Tube1-48" Pitot Tube1-Carrying CaseRELATED PRODUCTSMODEL       DESCRIPTION160-12-CF-Dwyer 160-12-CF SS Pitot Tube,12-5/8" Insertion Length,5/16" Dia.Compression Fitting160-12-Dwyer 160-12 Stainless Steel Pitot Tube,12-5/8" Insertion Length,5/16" Diameter160-18-Dwyer 160-18 Stainless Steel Pitot Tube,18-5/8" Insertion Length,5/16" Diameter160-24-CF-Dwyer 160-24-CF SS Pitot Tube,24-5/8" Insertion Length,5/16" Dia.Compression Fitting160-24-Dwyer 160-24 Stainless Steel Pitot Tube,24-5/8" Insertion Length,5/16" Diameter160-36-Dwyer 160-36 Stainless Steel Pitot Tube,36-5/8" Insertion Length,5/16" Diameter160-48-Dwyer 160-48 Stainless Steel Pitot Tube,48-5/8" Insertion Length,5/16" Diameter160-60-Dwyer 160-60 Stainless Steel Pitot Tube,60-5/8" Insertion Length,5/16" Diameter160-8-Dwyer 160-8 Stainless Steel Pitot Tube,8-5/8" Insertion Length,5/16" Diameter

Series 160 Stainless Steel Pitot Tube
Product Description

Dwyer Stainless Steel Pitot Tube is ideal to be used in the industrial operations with our precision manometers and Air Velocity Gages. Various Standard Sizes Are Available For Use in Ducts.

Features:

• No Calibration Needed.
• Precisely located, burr-free static Pressure Holes.
• Hemispherical tip design, Best for Accuracy if imperfectly Aligned and Nearly Impossible to Damage.
• Long lasting construction.
• Dwyer Air Velocity Calculator, direct reading flow charts and instructions included.
• Use 1/8" Models in ducts as small as 4" and 5/16" Models in Ducts 10" or larger.
• Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple.
• ASME Design Meets AMCA & ASHRAE Specifications.

APPLICATIONS

• Monitor or Control Air Velocity or Air Flow When Combined With Differential Pressure Gage, Switch, Or Transmitter