Product Details:
Minimum Order Quantity | 12 Piece |
Power Source | 24 VAC |
Dial Size | 4 inch / 100 mm |
Pressure Range | inWC / mmWC / MBAR / KPA / PA |
Use | Pharmaceutical Industries |
Display Type | Digital |
Pressure Type | Differential Pressure |
Connection Type | NPT |
Connection Size | 1/8 inch |
Dial Type | Dry |
Range Accuracy | 0.5% |
Mounting | Back |
Material of Casing | Plastic |
Model Name/Number | Series 3000 Gemtech digital pressure gauge |
Accuracy Class | 1 |
Window Material | Poly carbonate |
GEMTECH Digital Pressure Gauge HSN CODE | 90262000 |
Protection Type | GEMTECH Series 3000 Digital Pressure Gauge Range 60-0- 60 pascal |
Product Weight | 250 g |
Part Type | GEMTECH Series 3000 Digital Pressure Gauge Range 60-0- 60 pascal |
Series 3000 Gemtech digital pressure gauge Range 60-0- 60 pascal in Kurla Mumbai
Thank You For Choosing Our Digital Differential Pressure Gauge.Please Read This Manual Before Using
If You Have Any Doubt About The Use,Please Feel Free To Contact Our Company,We Are Quite Willing To Serve You.
MATTERS NEEDING ATTENTION:
Please Do Not Modify The Internal Wiring And Lines Of The Digital Differential Pressure Gauge By Your Self
Please Choose a Safe Area To Install The Digital Differential Pressure Gauge To Prevent High Temperature And Avoid Splashing Of Moisture And Water Droplets
When The Battery Voltage Is Low,Please Replace The Battery In Time
RELEVANT MATTERS BEFORE USE
DELIVERY INSPECTION
Each Differential Pressure Transmitter is Subject to Strict Quality Control Before Delivery.Product Packaging Adopts Enhanced Anti-Collision Treatment. After Opening The Box,Please Check Whether The Product Caused Damage During The Transportation
APPLICATIONS AND FEATURES
Using High-Precision Sensors And Digital Technology,Can Detect Positive Pressure,Negative Pressure Or Differential Pressure
Can Be Widely Used To Measure The Pressure Of Fans And Blowers Filter Resistance Wind Speed Furnace Ventilation Pressure Drop Caused By Orifice Plates,Liquid Level In Foaming Systems And Pressure In Booster Or Hydraulic Systems
Can Be Used On Medical Equipment To Monitor Blood And Respiratory Pressure
Suitable For Embedded Installation,Flat Installation And Other Installation Methods
Various Measuring Ranges
No Moving Parts,Anti-Vibration
Accuracy Up To ±1%FS, ±3%FS(0-60Pa),±2%FS(0-125Pa)
Button Function:Zero Calibration,Unit Switching
STORAGE AND INSTALLATION
The Product Should Be Kept In a Dry And Grime Free Place
Storage Temperature:-10℃~+40℃
Storage Humidity:0%~90%.
Vibration:20Hz: 9.8 m/s2 (1G) max;20Hz~50Hz:5.88 m/s2 (0. 6G) Max
Avoid Storing in Corrosive Gas And Liquid Environment.
It is Best to Store It Properly Packaged On a Shelf Or Table
If it is used in an open package and it exceeds 3 months, the ambient temperature of the storage environment should not be higher than 30 ℃.This is because when the electrolytic capacitor is stored without electricity,its characteristics are easily deteriorated when the ambient temperature is too high.Do not leave it for more than a year without electricity
Ambient temperature:-10~+50℃ (14~104℉)
Ambient relative humidity:<90%,no frost
Installation height:<1000m
On a circle with a diameter of 105mm,drill 3 holes with an average angle of 120 degrees.The hole diameter is between 3-3.2 (as shown in the picture above). Mounted on the surface with accessory screws M3X8.Choose one pair of pressure ports to connect to the air tube, pay attention to the difference between high and low pressure ports, and make sure to seal the other pair of pressure ports with
On the plate that needs to be embedded,punch a hole, the diameter of the hole is between 114 and 3-114.8mm. Embed the product and install the accessory feet on the back.Then fix it on the plate with M3.5X50 self-tapping screws.Choose one of the pair of pressure ports to connect to the airway. Note the Difference Between High/Low Pressure Ports And Make Sure To Seal The Other
PRODUCT PARAMETERS Medium:Air And Non-Flammable,Non-Corrosive Gas
Medium Temperature: 0-60°C
Shell:ABS Engineering Plastic
Working Environment:-20°C~+85°C
Differential Pressure Range:a variety of Ranges.Overload 3xFS,Breaking pressure 10 × FS
Long-Term Stability:±0.1% FS/Year
Temperature Drift Coefficient: <0.03% FS/°C
Power Supply:4 AA Batteries
Additional Information:
Product Details:
Minimum Order Quantity | 12 Piece |
Dial Size | 4 inch / 100 mm |
Pressure Range | inWC / mmWC / MBAR / KPA / PA |
Use | Pharmaceutical Industries |
Display Type | Digital |
Pressure Type | Differential Pressure |
Connection Type | NPT |
Connection Size | 1/8 inch |
Dial Type | Dry |
Mounting | Back |
Material of Casing | Plastic |
Model Name/Number | Series 3000 |
Accuracy Class | 1 |
Window Material | Acrylic |
Wetted Parts | Stainless Steel |
GEMTECH Digital Pressure Gauge HSN CODE | 90262000 |
Protection Type | Series 3000 Gemtech digital pressure gauge Range 30-0- 30 pascal |
Product Weight | 250 g |
Part Type | Series 3000 Gemtech digital pressure gauge Range 30-0- 30 pascal |
Country of Origin | Made in India |
Series 3000 Gemtech digital pressure gauge Range 30-0- 30 pascal from Vadodara,Gujarat
Thank You For Choosing Our Digital Differential Pressure Gauge.Please Read This Manual Before Using
If You Have Any Doubt About The Use,Please Feel Free To Contact Our Company,We Are Quite Willing To Serve You.
MATTERS NEEDING ATTENTION:
Please Do Not Modify The Internal Wiring And Lines Of The Digital Differential Pressure Gauge By Your Self
Please Choose a Safe Area To Install The Digital Differential Pressure Gauge To Prevent High Temperature And Avoid Splashing Of Moisture And Water Droplets
When The Battery Voltage Is Low,Please Replace The Battery In Time
RELEVANT MATTERS BEFORE USE
DELIVERY INSPECTION
Each Differential Pressure Transmitter is Subject to Strict Quality Control Before Delivery.Product Packaging Adopts Enhanced Anti-Collision Treatment. After Opening The Box,Please Check Whether The Product Caused Damage During The Transportation
APPLICATIONS AND FEATURES
Using High-Precision Sensors And Digital Technology,Can Detect Positive Pressure,Negative Pressure Or Differential Pressure
Can Be Widely Used To Measure The Pressure Of Fans And Blowers Filter Resistance Wind Speed Furnace Ventilation Pressure Drop Caused By Orifice Plates,Liquid Level In Foaming Systems And Pressure In Booster Or Hydraulic Systems
Can Be Used On Medical Equipment To Monitor Blood And Respiratory Pressure
Suitable For Embedded Installation,Flat Installation And Other Installation Methods
Various Measuring Ranges
No Moving Parts,Anti-Vibration
Accuracy Up To ±1%FS, ±3%FS(0-60Pa),±2%FS(0-125Pa)
Button Function:Zero Calibration,Unit Switching
STORAGE AND INSTALLATION
The Product Should Be Kept In a Dry And Grime Free Place
Storage Temperature:-10℃~+40℃
Storage Humidity:0%~90%.
Vibration:20Hz: 9.8 m/s2 (1G) max;20Hz~50Hz:5.88 m/s2 (0. 6G) Max
Avoid Storing in Corrosive Gas And Liquid Environment.
It is Best to Store It Properly Packaged On a Shelf Or Table
If it is used in an open package and it exceeds 3 months, the ambient temperature of the storage environment should not be higher than 30 ℃.This is because when the electrolytic capacitor is stored without electricity,its characteristics are easily deteriorated when the ambient temperature is too high.Do not leave it for more than a year without electricity
Ambient temperature:-10~+50℃ (14~104℉)
Ambient relative humidity:<90%,no frost
Installation height:<1000m
On a circle with a diameter of 105mm,drill 3 holes with an average angle of 120 degrees.The hole diameter is between 3-3.2 (as shown in the picture above). Mounted on the surface with accessory screws M3X8.Choose one pair of pressure ports to connect to the air tube, pay attention to the difference between high and low pressure ports, and make sure to seal the other pair of pressure ports with
On the plate that needs to be embedded,punch a hole, the diameter of the hole is between 114 and 3-114.8mm. Embed the product and install the accessory feet on the back.Then fix it on the plate with M3.5X50 self-tapping screws.Choose one of the pair of pressure ports to connect to the airway. Note the Difference Between High/Low Pressure Ports And Make Sure To Seal The Other
PRODUCT PARAMETERS Medium:Air And Non-Flammable,Non-Corrosive Gas
Medium Temperature: 0-60°C
Shell:ABS Engineering Plastic
Working Environment:-20°C~+85°C
Differential Pressure Range:a variety of Ranges.Overload 3xFS,Breaking pressure 10 × FS
Long-Term Stability:±0.1% FS/Year
Temperature Drift Coefficient: <0.03% FS/°C
Power Supply:4 AA Batteries
Additional Information:
Product Details:
Minimum Order Quantity | 12 Piece |
Dial Size | 4 inch / 100 mm |
Pressure Range | inWC / mmWC / MBAR / KPA / PA |
Use | Calibration |
Display Type | Digital |
Pressure Type | Differential Pressure |
Connection Type | NPT |
Connection Size | 1/8 inch |
Dial Type | Dry |
Mounting | Back |
Material of Casing | Plastic |
Model Name/Number | Series 3000 Gemtech |
Accuracy Class | 1 |
Window Material | Poly carbonate |
Part Type | Series 3000 Gemtech digital pressure gauge Range 0- 6 mm wc |
Voltage | 24 VAC |
Protection Type | Series 3000 Gemtech digital pressure gauge Range 0- 6 mm wc |
Product Weight | 250 g |
GEMTECH Digital Pressure Gauge HSN CODE | 90262000 |
Country of Origin | Made in India |
Series 3000 Gemtech digital pressure gauge Range 0- 6 mm wc from Nilanga,Latur,Maharashtra
Thank You For Choosing Our Digital Differential Pressure Gauge.Please Read This Manual Before Using
If You Have Any Doubt About The Use,Please Feel Free To Contact Our Company,We Are Quite Willing To Serve You.
MATTERS NEEDING ATTENTION:
Please Do Not Modify The Internal Wiring And Lines Of The Digital Differential Pressure Gauge By Your Self
Please Choose a Safe Area To Install The Digital Differential Pressure Gauge To Prevent High Temperature And Avoid Splashing Of Moisture And Water Droplets
When The Battery Voltage Is Low,Please Replace The Battery In Time
RELEVANT MATTERS BEFORE USE
DELIVERY INSPECTION
Each Differential Pressure Transmitter is Subject to Strict Quality Control Before Delivery.Product Packaging Adopts Enhanced Anti-Collision Treatment. After Opening The Box,Please Check Whether The Product Caused Damage During The Transportation
APPLICATIONS AND FEATURES
Using High-Precision Sensors And Digital Technology,Can Detect Positive Pressure,Negative Pressure Or Differential Pressure
Can Be Widely Used To Measure The Pressure Of Fans And Blowers Filter Resistance Wind Speed Furnace Ventilation Pressure Drop Caused By Orifice Plates,Liquid Level In Foaming Systems And Pressure In Booster Or Hydraulic Systems
Can Be Used On Medical Equipment To Monitor Blood And Respiratory Pressure
Suitable For Embedded Installation,Flat Installation And Other Installation Methods
Various Measuring Ranges
No Moving Parts,Anti-Vibration
Accuracy Up To ±1%FS, ±3%FS(0-60Pa),±2%FS(0-125Pa)
Button Function:Zero Calibration,Unit Switching
STORAGE AND INSTALLATION
The Product Should Be Kept In a Dry And Grime Free Place
Storage Temperature:-10℃~+40℃
Storage Humidity:0%~90%.
Vibration:20Hz: 9.8 m/s2 (1G) max;20Hz~50Hz:5.88 m/s2 (0. 6G) Max
Avoid Storing in Corrosive Gas And Liquid Environment.
It is Best to Store It Properly Packaged On a Shelf Or Table
If it is used in an open package and it exceeds 3 months, the ambient temperature of the storage environment should not be higher than 30 ℃.This is because when the electrolytic capacitor is stored without electricity,its characteristics are easily deteriorated when the ambient temperature is too high.Do not leave it for more than a year without electricity
Ambient temperature:-10~+50℃ (14~104℉)
Ambient relative humidity:<90%,no frost
Installation height:<1000m
On a circle with a diameter of 105mm,drill 3 holes with an average angle of 120 degrees.The hole diameter is between 3-3.2 (as shown in the picture above). Mounted on the surface with accessory screws M3X8.Choose one pair of pressure ports to connect to the air tube, pay attention to the difference between high and low pressure ports, and make sure to seal the other pair of pressure ports with
On the plate that needs to be embedded,punch a hole, the diameter of the hole is between 114 and 3-114.8mm. Embed the product and install the accessory feet on the back.Then fix it on the plate with M3.5X50 self-tapping screws.Choose one of the pair of pressure ports to connect to the airway. Note the Difference Between High/Low Pressure Ports And Make Sure To Seal The Other
PRODUCT PARAMETERS Medium:Air And Non-Flammable,Non-Corrosive Gas
Medium Temperature: 0-60°C
Shell:ABS Engineering Plastic
Working Environment:-20°C~+85°C
Differential Pressure Range:a variety of Ranges.Overload 3xFS,Breaking pressure 10 × FS
Long-Term Stability:±0.1% FS/Year
Temperature Drift Coefficient: <0.03% FS/°C
Power Supply:4 AA Batteries
Additional Information:
Product Details:
Dial Size | 4 inch / 100 mm |
Pressure Range | 0-125 pascal |
Use | Pharmaceutical Industries |
Display Type | Digital |
Pressure Type | Differential Pressure |
Connection Type | NPT |
Connection Size | 1/8 inch |
Dial Type | Dry |
Product Details:
Dial Size | 4 inch / 100 mm |
Pressure Range | 0-60 pascal |
Use | HVAC Systems |
Display Type | Digital |
Pressure Type | Differential Pressure |
Connection Type | NPT |
Connection Size | 1/8 inch |
Dial Type | Dry |