Product Details:
Usage/Application | Industrial / Commercial |
Model Name/Number | DM-2006-LCD |
Brand | Dwyer |
Accuracy | + / - 1 % F.S. |
Temperature Limits | 20 to 120 DegreeF (-6.67 to 48.9 DegreeC) |
Pressure Limits | 10 psig (0.69 bar) |
Power Requirements | 10-35 VDC (2 wire) |
Output Signal | 4 to 20 mA |
Weight | 136 Gm |
Dwyer DM-2006-LCD PRESSURE TRANSMITTER
A wide range of models are available factory calibrated to specific ranges
Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
Digital push-button zero and span simplify calibration over typical turn-potentiometers
An optional 3.5 digit LCD shows process and engineering units
A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models
Specifications
Service: Air and non-combustible, compatible gases.
Wetted Materials: Consult Factory.
Accuracy: ±1% F.S. at 70°F.
Stability: +1% F.S./yr.
Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
Pressure Limits: 10 psig (0.69 bar).
Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
Power Requirements: 10-35 VDC (2 wire).
Output Signal: 4 to 20 mA.
Zero and Span Adjustments: Digital push-button zero and span.
Loop Resistance: DC: 0-1250 ohms maximum.
Current Consumption: DC: 38 mA maximum.
Electrical Connections: Screw-type terminal block.
Display: 3.5 digit LCD, 0.7" height.
Process Connections: 1/8" I.D. tubing.
Mounting Orientation: Vertical.
Weight: 4.8 oz (136 g).
Model
DM-2006-LCD
Description
Differential pressure transmitter, range 3.00" w.c., 746 Pa, 76.2 mm w.c., 7.46 mbar, .746 kPa, .108 psi.
Product Details:
Usage/Application | Industrial / Commercial |
Model Name/Number | DM-2004-LCD |
Brand | Dwyer |
Accuracy | +-1% F.S. |
Temperature Limits | 20 to 120 DegreeF (-6.67 to 48.9 DegreeC) |
Pressure Limits | 10 psig (0.69 bar) |
Power | 10-35 VDC (2 wire) |
Output Signal | 4 - 20 mA |
Dwyer DM-2004-LCD PRESSURE TRANSMITTER
A wide range of models are available factory calibrated to specific ranges.
Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy.
Digital push-button zero and span simplify calibration over typical turn-potentiometers
An optional 3.5 digit LCD shows process and engineering units.
A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models.
Specifications
Service: Air and non-combustible, compatible gases.
Wetted Materials: Consult Factory.
Accuracy: ±1% F.S. at 70°F.
Stability: +1% F.S./yr.
Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
Pressure Limits: 10 psig (0.69 bar).
Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
Power Requirements: 10-35 VDC (2 wire).
Output Signal: 4 to 20 mA.
Zero and Span Adjustments: Digital push-button zero and span.
Loop Resistance: DC: 0-1250 ohms maximum.
Current Consumption: DC: 38 mA maximum.
Electrical Connections: Screw-type terminal block.
Display: 3.5 digit LCD, 0.7" height.
Process Connections: 1/8" I.D. tubing.
Mounting Orientation: Vertical.
Weight: 4.8 oz (136 g).
Model DM-2004-LCD
Description
Differential pressure transmitter, range 1.00" w.c., 249 Pa, 25.4 mm w.c., 2.49 mbar, .249 kPa.
Product Details:
Usage/Application | Industrial / Commercial |
Model Name/Number | DM-2001-LCD |
Brand | Dwyer |
Accuracy | + / - 2.5% |
Dial Material | ABS |
Shape | Round / Olive |
Product Details:
Model Name/Number | Sz-5000 |
Usage/Application | Industrial / Commercial |
Material | Steel And ABS |
Display Type | Analog |
Brand | D.P. Engineers |
Accuracy | 5 % |
Dial Shape | Round |
Application | Monitoring Filter Status, Duct Static Pressure, Room Pressure, Fan Or Blower Pressure, Paint Booths |
Colour | Black |
Product Details:
Brand | Dwyer |
Model Name/Number | DM-1103 |
Usage/Application | Industrial / Commercial |
Display Type | LCD Display |
Accuracy | 1% |
Power Requirement | 9-24 VDC |
Battery Power | 9 V |
Product Details:
Usage/Application | Industrial / Commercial |
Model Name/Number | 211-D001I-1 |
Brand | Sensocon |
Accuracy | 0.2 5% |
Operating Range | 0-1" w.c. |
Housing Material | ABS Plastic |
Temperature Range | -10 Degree to 50 DegreeC |
Output Signal | 4-20 mA |
Power Supply | 12-30 VDC |
Sensocon USA SERIES 211-D001I-1 Differential Pressure Transmitter
Model - 211-D001I-1
Pressure Range - 0-1"
Accuracy - 1%
• Compact Design
• 0.25% Accuracy
• LED Power Indication
• 4 – 20 mA or 0 – 10 V output
The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
SPECIFICATIONS
Maximum Pressure:
Ranges ≤ 5 PSI (35 kPa) = 15 PSI (100 kPa) Max Ranges > 5 PSI (35 kPa) = 30 PSI (200 kPa) Max
Media Compatibility:
Air and compatible noncombustible, non-corrosive gasses
Accuracy:
Ranges ≤ 4" w.c. (1 kPa) 1.0% Ranges ≥ 5" w.c. (1.25 kPa) 0.25%
Temperature Ranges:
Compensated: 15° to 120°F (-10° to 50°C) Operating: -10° to 155°F (-25° to 70°C)
Thermal Effect:+/- 0.028% FS/°F (+/- 0.050%/°C)
Stability: +/- 0.25% FS/year
Output Signal: 4-20 mA, 2 wire or 0-10V
Loop Resistance: 250 Ω @ 24 VDC
Power Supply: 12-30 VDC
Housing Material: ABS Plastic
Electrical Connections: screw terminals
Process Connection: Push on connection for 3/16" I.D. tubing
Agency Approvals: CE
Product Details:
Minimum Order Quantity | 10 Piece |
Model Number | ASGC-300PA |
Usage/Application | Filter Monitoring Blower Vacuum Monitoring Fan Pressure Indication Duct,room Or Building Pressures |
Measuring Range | 150-0-150 PA |
Scale Range | 150-0-150PA |
Diameter | 4" (101.6 mm) diameter dial face |
Weight | 510 g |
Dial Size | 4" (101.6 mm) diameter dial face |
Mounting | Diaphragm In Vertical Position. Consult Factory For Other Position Orientations |
Brand | Aerosense |
Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.
Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.
Product Applications:
Additional Information:
Product Details:
Dial Size | 4 inch / 100 mm |
Brand | Dwyer |
Use | Pharmaceutical Industries |
Display Type | Analog |
Pressure Type | Differential Pressure |
Connection Type | NPT |
Connection Size | 1/8 inch |
Dial Type | Dry |
Product Details:
Dial Size | 4 inch / 100 mm |
Brand | Dwyer |
Use | Pharmaceutical Industries |
Display Type | Analog |
Pressure Type | Differential Pressure |
Connection Type | NPT |
Connection Size | 1/8 inch |
Dial Type | Dry |
Product Details:
Dial Size | 4 inch / 100 mm |
Brand | Dwyer |
Use | Pharmaceutical Industries |
Display Type | Analog |
Pressure Type | Differential Pressure |
Connection Type | NPT |
Connection Size | 1/8 inch |
Dial Type | Dry |
Product Details:
Model Name/Number | 2203 |
Usage/Application | Industrial / Commercial |
Display Type | Analog |
Color | Black |
Accuracy | 2 % |
Dial Shape | Round |
Brand | Dwyer |
Dial Material | ABS |
Dwyer 2203 Magnehelic Differential Pressure Gauge
Differential Pressure Gauge 0-3 psi
Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too. The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipmen
Product Details:
Dial Type | Dry |
Usage/Application | Industrial / Commercial |
Display Type | Digital |
Mounting | Back |
Material of casing | ABS |
Model Name/Number | DM 1102 |
Window Material | Safety Glass |
Brand | Dwyer |
Dial Shape | Round |
Accuracy | +/- 1% FSD |
Product Details:
Brand | Dwyer |
Model Name/Number | DM-1105 |
Usage/Application | Industrial / Commercial |
Material | ABS |
Display Type | Digital |
Accuracy | 1 % |
Battery Power | 9 V |
Shape | Round |
Product Details:
Brand | Dwyer |
Model Name/Number | DM-1104 |
Usage/Application | Industrial / Commercial |
Material | ABS |
Display Type | Digital |
Scale Range | 0-1.00"WC |
Dial Shape | Round |
DWYER DM-1104 DIGIMAG DIFFERENTIAL PRESSURE GAUGE
Dwyer Instruments DM-1104
DigiMag Differential Digital Pressure Gage,Range 0-1.00"WC
The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
Product Details:
Power Source | 9 - 24 VDC |
Brand | Dwyer |
Display Digits | 4 |
Use | Calibration |
Display Type | Digital |
Accuracy | 2 % |
Model Name/Number | DM-1107 |
Scale Range | 0-5"w.c |
DWYER USA DM-1107 DIGIMAG DIFFERENTIAL PRESSURE GAUGEDwyer Instruments DM-1107
DigiMag Differential Digital Pressure Gage,0-5″w.c
The DigiMag Series DM-1000 Digital Differential Pressure and Flow gauge monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital gauge are more versatile than analog gauge with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gauges have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow gauge possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure gauge offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
Product Details:
Usage/Application | Industrial / Commercial |
Material | ABS |
Battery Included | Yes |
Shape | Round |
Brand | Dwyer |
Model No. | DM-1123 |
Battery Power | 9 V |
Additional Information:
Product Details:
Model Name/Number | DM-1124 |
Usage/Application | Industrial / Commercial |
Display Type | Digital |
Brand | Dwyer |
Accuracy | 2 % |
Dial Shape | Round |
Dial Material | ABS |
Product Details:
Usage/Application | Industrial / Commercial |
Surface Finish | Powder Coated |
Brand | D.p.Engineers |
Size | 100 mm - 400 mm |
Color | White |
Material | Plastic |
Jet Nozzles are to be used for very high ceiling like airports, cinema theaters, shopping malls, exhibition halls and high roofing industries. For ceiling mounting supply of large quantities of air or side wall installation with very long throws. They are having high air handling capacity with low noise level.
Mounting:
Fixing by means of visible metal screws on flanges in side throw or to be fixed directly with plenum boxes.Implementation:
Frame and inner rings are made of high quality aluminum jet diffusers are mounted in aluminum square plate covered by flanged border. Diffusers can be adjustable 30º upwards or downwards to achieve required throw as per site conditions.Technical Details:
Neck Size150200250300350400450Outer Size195245295355405455505
Standard Finishes Available in natural Aluminum, anodized or powder coated in standard RAL white colors.
Specifications:
Product Details:
Brand | Sensocon USA |
Measuring Range | +-1.00" WC||+-250 Pa |
Model Name/Number | A1001-02 |
Usage/Application | Industrial |
Material | Plastic |
Display Type | Yes |
Type | Sensocon Digital Differential Pressure Gauge Modal A1001-02 |
Color | Black |
Scale Range | +-1.00" WC||+-250 Pa |
Accuracy | +-0.50% |
Diameter | 5" |
Power | 24-240 VAC/VDC |
Dial Size | 5" |
Signal Output | Optional 4-20 mA output |
Size | 5" |
I Deal In | New Only |
Battery Included | No |
Country of Origin | Made in India |
Additional Information:
Product Details:
Usage/Application | Industrial / Commercial |
Model Name/Number | DM-2005-LCD |
Brand | Dwyer |
Accuracy | +-1% F.S. |
Temperature Limits | 20 to 120 DegreeF (-6.67 to 48.9 DegreeC) |
Pressure Limits | 10 psig (0.69 bar) |
Power Requirements | 10-35 VDC (2 wire) |
Output Signal | 4 to 20 mA |
Additional Information:
Product Details:
Usage/Application | Industrial / Commercial |
Model Name/Number | DM-2002-LCD |
Brand | Dwyer |
Accuracy | + / - 1 %F.S. |
Product Weight | 136 Gm |
Power | 10 - 35 VDC |
Temperature Limits | 20 to 120 DegreeF (-6.67 to 48.9 DegreeC) |
Pressure Limits | 10 psig (0.69 bar) |
Output Signal | 4 to 20 mA |
Display | 3.5 digit LCD |
Dwyer DM-2002-LCD Differential Pressure Transmitter
A wide range of models are available factory calibrated to specific ranges
Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
Digital push-button zero and span simplify calibration over typical turn-potentiometers
An optional 3.5 digit LCD shows process and engineering units
A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models
Specifications
Service: Air and non-combustible, compatible gases.
Wetted Materials: Consult Factory.
Accuracy: ±1% F.S. at 70°F.
Stability: +1% F.S./yr.
Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
Pressure Limits: 10 psig (0.69 bar).
Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
Power Requirements: 10-35 VDC (2 wire).
Output Signal: 4 to 20 mA.
Zero and Span Adjustments: Digital push-button zero and span.
Loop Resistance: DC: 0-1250 ohms maximum.
Current Consumption: DC: 38 mA maximum.
Electrical Connections: Screw-type terminal block.
Display: 3.5 digit LCD, 0.7" height.
Process Connections: 1/8" I.D. tubing.
Mounting Orientation: Vertical.
Weight: 4.8 oz (136 g).
Model
DM-2002-LCD
Description
Differential pressure transmitter, range .250" w.c., 62.2 Pa, 6.35 mm w.c., .622 mbar.
Product Details:
Usage/Application | Industrial / Commercial |
Model Name/Number | DM-2003 |
Accuracy | +-1% F.S. at 70 DegreeF. |
Brand | Dwyer |
Temperature Limits | 20 to 120 DegreeF (-6.67 to 48.9 DegreeC) |
Pressure Limits | 10 psig (0.69 bar) |
Display Type | 3.5 digit LCD |
Weight | 136 Gm |
Dwyer DM-2003 PRESSURE TRANSMITTER, 0 - 0.5
A wide range of models are available factory calibrated to specific ranges
Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
Digital push-button zero and span simplify calibration over typical turn-potentiometers
An optional 3.5 digit LCD shows process and engineering units
A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models
Specifications
Service: Air and non-combustible, compatible gases. Wetted Materials: Consult Factory. Accuracy: ±1% F.S. at 70°F. Stability: +1% F.S./yr. Temperature Limits: 20 to 120°F (-6.67 to 48.9°C). Pressure Limits: 10 psig (0.69 bar). Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C). Power Requirements: 10-35 VDC (2 wire). Output Signal: 4 to 20 mA. Zero and Span Adjustments: Digital push-button zero and span. Loop Resistance: DC: 0-1250 ohms maximum. Current Consumption: DC: 38 mA maximum. Electrical Connections: Screw-type terminal block. Display: 3.5 digit LCD, 0.7" height. Process Connections: 1/8" I.D. tubing. Mounting Orientation: Vertical. Weight: 4.8 oz (136 g).
Product Details:
Minimum Order Quantity | 10 Packet |
Display Type | Digital |
Application | Industrial Ovens Batch Counting In Conveyor Systemssilk Screening Equipment |
Usage/Application | Industrial |
Brand | Dwyer |
Weight | 4 oz (114 g). |
Operating Temp. | 32 to 122 Degree F (0 to 50 Degree C). |
Condition | New |
Humidity | 35 to 85% RH (non-condensing). |
Reset Time | 0.001 S. minimum. |
Power Requirements | 100 to 240 VAC 50 / 60 Hz. |
Power Consumption | Less than 10 VA. |
Internal Power Supply | 12 VDC +/-10%, 100 mA |
Additional Information:
Product Details:
Brand | D.P. Engineers |
Usage/Application | Industrial / Commercial |
Color | Black |
Kit Containt | 2 Low Profile Plastic 'stabbings' And 4 Fixing Screws |
Tube Material | Plastic |
Tube Length | 2 Meter |
Additional Information: